Luminous Flux: 5000lm
Dimensions: 35 x 17 x 4.7 inch
Emitted Color: Cool White 6000-7000K
Input Voltage: AC85-265V
Lighting Mode: DIM/Bright
Install Height : 7-23ft (2-7 Meters)
Working Temperature: 32℉-140℉ (0℃-60℃)
1 x 50W Solar Street Light
4 x Screws
1 x User Manual
Available lighting area: 30x30 ft² / 9x9 m²
Solar Street Light - 50w
- ☀️[Turn ON/OFF Automatically]: Light Sensor--outdoor solar street lights turns on at dusk keep on dim mode, turn off at daytime and start recharge. PIR Motion Sensor(120° angle, 19.6ft sensor distance)--led solar lights become bright mode when motion is detected, it reverts back to dim mode again if motion is out of detection.
- ☀️[Longer Lighting Time]: At Full Charge, 50w solar street lights bright mode working time is up to 8-10 hours at night, dim mode working time is more than 35 hours. Dusk to dawn solar light built-in 23200mAh large capacity lithium battery.
- ☀️[Super Bright, Cover Large Area]: led street light 144pcs leds with 5000 lumens, and it can replace a 300 watt metal halide MH or HPS/HID light.
- ☀️[Easy Mounting, No Needed Wire]: Dusk to dawn outdoor street light can be mounted on wall or pole easily (supported pole diameter: 1 inch to 1.96 inch, suggested fixed height: 9.8ft-13.1ft ). Turn on the switch before mounting or charging.
Q：Is the switch on when pushed in or out?
A：Push in, it clicks and slightly (1/3) sinks in.
Q：Does this light have a function to come on at dusk and then off at dawn?
A：Yes. It is automatic turn on at dusk and then off at dawn, It has light sensing and motion sensing.
Charging Time: 6-8 hours with full sunshine.
Distinguish Between On and Off
Please confirm that switch has opened before installation and charging
Motion Sensor&Light Sensor
Dusk-to-dawn dim modes
Once motion detected, it turns brighter
Reverts back to dim light if out of detection
Super Sensitive PIR Motion Sensor
PIR motion sensor can detect moion within a range of up to 26.4FT(8M),120º sensing angle provides timely illumination when you are in need
Frequently Asked Questions
Question: Why are there sometimes only dim modes?
Answer: The battery level is too low, bright mode will disappear.
Question: Must the switch be turned on when charging?
Answer: Yes. Please confirm that the switch is turned on before installation and charging.
Question: Why is the lighting time shorter in winter?
Answer: There are three reasons about this: 1. In winter, because of sun ray is weak, then the solar panel conversion capacity is reduced, lead to shorter lighting time.2. When the temperature is below 0℃, the battery turns on the automatic protection function, causes it can't be charged. 3. When the solar panel is covered with snow, it cannot be charged.
Question: At night, after turning on the switch, why doesn't it light up immediately?
Answer: It will light up after 10 seconds. Because the sensor has a buffer time.
We are a leading company in manufacturing the LED Street Lights products for years. The design of the integrated solar street light absorbs the inspiration and energy from sunlight, and combines today's best green portfolio. Our responsibility is to protect the environment by saving energy, and to be a low carbon pioneer
To best serve our clients, MORSEN offers customized lighting design for your facility and goals. We also looking for authorized reseller or Retail Location. If you are interested in becoming a reseller, please send your request to email@example.com