Actual Luminous Flux: 2000lm
Dimensions: 26.4 x 12.4 x 3.1 inch
Emitted Color: 6000K
2 Lighting Mode: 20%/100% Brightness
Install Height : 6-20 ft (2-6 Meters)
Working Temperature: 32℉-140℉ (0℃-60℃)
1 x 25W Solar Street Light
2 x Screws
1 x User Manual
Lighting area@13ft/4m: 19x19 ft² / 5.5x5.5m²
Solar Street Light - 25w (Up to 20% off)
Actual Luminous Flux: 2000lm
☀️Led street lights outdoor built-in motion sensor and light sensor regulates light automatically with 30% brightness(turn on at dusk, turn off at dawn). Bright mode, 100% brightness for 40s when motion detected.
☀️Solar street light easy installation, maintenance-free dependable operation without the need for wiring or trench. Built-in large capacity lithium battery 12.6v 12000mAh. Working temperature: 32℉-140℉. Please turn on the switch before installation or charging.
☀️Suggest pole diameter 5cm-8cm (1.97-3.15 inch). Suggest installation height is 13 ft; 10-15 meter (32.8-49 feet) distance between pole to pole. Important notice: pole is not included.
☀️Be sure to charge solar panel in full sun for 8 hours before use. When solar-powered 25 watt led street light doesn't work according to manual, please charge in the sun for 3 days before use. Low battery power will affect normal operation. The light only comes on at night Or in the dark.
Q：Is the switch on when pushed in or out?
A：Push in, it clicks and slightly (1/3) sinks in.
Q：Does this light have a function to come on at dusk and then off at dawn?
A：Yes. It is automatic turn on at dusk and then off at dawn, It has light sensing and motion sensing.
Charging Time: 6-8 hours with full sunshine.
Distinguish Between On and Off
Please confirm that switch has opened before installation and charging
Motion Sensor&Light Sensor
Dusk-to-dawn dim modes
Once motion detected, it turns brighter
Reverts back to dim light if out of detection
Super Sensitive PIR Motion Sensor
PIR motion sensor can detect moion within a range of up to 26.4FT(8M),120º sensing angle provides timely illumination when you are in need
Frequently Asked Questions
Question: Why are there sometimes only dim modes?
Answer: The battery level is too low, bright mode will disappear.
Question: Must the switch be turned on when charging?
Answer: Yes. Please confirm that the switch is turned on before installation and charging.
Question: Why is the lighting time shorter in winter?
Answer: There are three reasons about this: 1. In winter, because of sun ray is weak, then the solar panel conversion capacity is reduced, lead to shorter lighting time.2. When the temperature is below 0℃, the battery turns on the automatic protection function, causes it can't be charged. 3. When the solar panel is covered with snow, it cannot be charged.
Question: At night, after turning on the switch, why doesn't it light up immediately?
Answer: It will light up after 10 seconds. Because the sensor has a buffer time.
We are a leading company in manufacturing the LED Street Lights products for years. The design of the integrated solar street light absorbs the inspiration and energy from sunlight, and combines today's best green portfolio. Our responsibility is to protect the environment by saving energy, and to be a low carbon pioneer
To best serve our clients, MORSEN offers customized lighting design for your facility and goals. We also looking for authorized reseller or Retail Location. If you are interested in becoming a reseller, please send your request to email@example.com