Apollo 1200W LED Grow Light | Best Full Spectrum Indoor Plant Light — Morsen Skip to content

Apollo Series - 1200w (Up to 20% off)

by MORSEN
$145.00
 
Rated Wattage:  1200W
Actual Consumption: 185W
HPS Wattage Equivalent:  300W
Dimensions:  20.8″ x 10.5″ x 3.2″
Weight:  13.7 lbs
Total Diodes: 120
Coverage Area: 3.5' x2.5' @ 18"
Input Voltage: 85-265V AC Power Input
Package Contents:
1 x COB Series 1200W
1 x Hanging Kits
1 x 4.5ft Power Cord
1 x Installation User Manual
Warranty: 3-Year

    PROUDLY CERTIFIED BY

  • Description
  • Specification
  • Attention
  • Support

【Advanced Full Spectrum】: The led grow light comes with super bright 42pcs 10w dual Chips, 20 Red+ 12 Blue+ 4 IR+ 2 Green + 2 BIG COB, which is similar to the sunlight, give off perfect wavelength for all growing stage. Suitable for seeding, germination, vegetative & flowering

【Dimmable and Durable】: Two On-off switch on the back of the light, easily control the brightness of light, 2 UL certificated cooling fans, strong heat dissipation design and adopting isolated power supply, low noise, lifespan up to 50,000 hours

【High Efficiency and Energy Saving】: The led plant grow lamp effectively replaces a conventional 350 watt HPS grow light, while consuming only 185w! led grow lights can save more than 50 percent of electricity compared to traditional lights

【Widely Used】: The led grow lights are suitable for all plants, flowers, vegetables, fruits and succulents. Perfect plant light for indoor plants, office, balcony, darkroom, home, greenhouse

Chips brand: 10W EPILEDS double chips
Chips Qty:42pcs (Red 20pcs, Blue 12pcs, Green 2pcs, IR4pcs; NOTE: the IR led is not very bright but it's helpful for flowering)
Actual Power Consumption: about 560W, energy saving increase the yield easily.
Dimension: 20.8 x 10.5 x 3.2 inches
Weight:13.7 lb
Coverage Area: about 3.5 x 2.5 Square Feet (The lighting area and the height are changeable according to different plants and environments)
Power Factor: >97%
Lifespan: >50,000hours
Worldwide Voltage: 85v-265v
Working Frequency: 50~60Hz
Working environment : -20~40 45%~95%RH

Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture
The working environment is -20~40℃,45%RH~90%RH
Lighting Time setup: Vegetative Stage: 12-14 hours on; Flowering Stage: 9-12 hours on. Fruiting Stage: 7- 8 hours on (Turn off the light 30mins after running 12hours)
Suggest distance above plants: 1ft~2ft

To protect the light, Please cut off the power when there is a lighting strike

Get In Touch

For general questions and quote please contact:
Email: service@morsenled.com
Call & Text Us: +1(319) 512-3886
 
 
For warranty request:
Please present the order number, and pictures or videos of the products
How do I switch between veg and flower spectrums?
You don't need to switch, this light is full spectrum for both veg and flower spectrums. Turn both switches to get maximum outcome.
 
What is recommended height of hanging Morsen LED grow light?
Par value is determined by the height of the illumination, the closer the distance the higher the par value.
Morsen Grow Light should be 12-24 inches from the top of the canopy, but don't get too close to burn the plants.

Lighting Modes

Two On-off switch on the back of the light, easily control the brightness of light

Par Value

  • Par value is determined by the height of the illumination
  • The closer the distance the higher the Par value
  • We recommend the installation height is 12-24 inch which is most suitable for plant growth

120° wide angle illumination

120° wide angle illumination which can cover more areas for plants

Ultra Quiet Cooling System

UL certificated cooling fans

Strong heat dissipation design and low noise

lifespan up to 30,000 hours

Morsen led grow light is designed full spectrum for satisfying almost all indoor plants growers. Morsen has own factory, research, design, development, production and testing teams to support the high quality products. All Morsen grow lights will be tested for 48 hours before shipping, to make sure each light in their perfect condition, built to a highest standard quality. Please send your request to: service@morsenled.com